Spindle Removal (continued)
5. Using a 1-1/2 inch and a 15/16 inch wrench, hold the spindle shaft and
remove the (5/8 inch) bolt securing the blade to the spindle shaft. Remove
the blade.
6. Using a 1-1/2 and 1-1/8 inch wrench, hold the spindle shaft and remove the
(3/4 inch) nut securing the blade drive sheave to the spindle. Remove the
blade drive sheave.
g422372
Figure 52
g429399
Figure 53
7. Using a 1/2 inch socket, remove the 6 (5/16 inch) bolts securing the spindle
assembly to the deck. Remove the spindle assembly .
Deck: Service and Repairs Page 5–14 2000 Series Z MASTER®Service Manual
3460-328 Rev A
To Next Page
Loading...
