- 9 -
Bitmap fonts cannot be used for Access. When
using Access, remove the check from the “List
Bitmap Font” checkbox in the “Font Settings”
dialog.
Do not install other Seagull Scientific printer drivers in the PC where this product has been installed. If
you installed any by mistake, uninstall the all printer drivers by the DriverWizard, then reinstall this product
only.
When printing is performed from an application
created by Active Reports, open the Properties,
click the [Advanced] tab, and remove the check
from the “Enable advanced printing features”
checkbox.
When data with a large number of digits is encoded
into a bar code (or 2D code), and if that bar code
cannot be printed within a page width, such data
will be invalid.
When you use data with a large number of digits,
click the [Fonts] tab, select the bar code font, click
the [Font] button and the [Edit], then, check the
“Join Multiple Lines” checkbox. When this
checkbox is checked, every data specifying the
same font will be incorporated into one bar code.
If you want to print more than one bar code of the
same font with this feature enabled, register
required number of bar code fonts.
Example: When you want to print three Code128
symbols in a page with the “Join
Multiple Lines” enabled, register three
Code128 bar code fonts and specify
one to one:
Barfont Code128-1
Barfont Code128-2
Barfont Code128-3
To Next Page
Loading...
Need help?
General
