Toshiba CTX100-S - Page 346

Telephone Button Programming
200 Series Programs
13-32 Strata CTX Programming - Part 3: Telephone Button Programming 11/03
202-06 BRI Station DRL
• Day1 DRL
• Day2 DRL
• Night DRL
)% , n, 6SNU , n,
6SNU , n, +ROG
n = 1~16 DRL for Day1
DRL for Day2
DRL for Night
202-07 BRI Station FRL
• Day1 FRL
• Day2 FRL
• Night FRL
)% , n, 6SNU , n,
6SNU , n, +ROG
n = 1~16 FRL for Day1
FRL for Day2
FRL for Night
202-08 LCR Group
)% , n, +ROG
n = 1~16 LCR Group Number
202-09 BRI Station QPL
• Day1 QPL
• Day2 QPL
• Night QPL
)% , n, 6SNU , n,
6SNU , n, +ROG
n = 1~16 QPL for Day1
QPL for Day2
QPL for Night
202-10 Speech Capability
)% , n, +ROG
n = 1. Enable
2. Disable
Enable Bearer Capability Speech. See “BRI Bearer Capability of
ISDN” on page 13-34.
202-11 3.1 KHz Audio
)% , n, +ROG
n = 1. Enable
2. Disable
Enable Bearer Capability 3.1kHzAudio. See “BRI Bearer Capability of
ISDN” on page 13-34.
202-12 7 KHz Audio
)% , n, +ROG
n = 1. Enable
2. Disable
Enable Bearer Capability 7kHzAudio. See “BRI Bearer Capability of
ISDN” on page 13-34.
202-13 64Kbps Unrestricted
)% , n, +ROG
n = 1. Enable
2. Disable
Enable Bearer Capability unrestricted digital Information 64kbps. See
“BRI Bearer Capability of ISDN” on page 13-34.
202-14 56Kbps Unrestricted
)% , n, +ROG
n = 1. Enable
2. Disable
Bearer Capability unrestricted digital Information 56kbps.
202-15 2 x 64Kbps
Unrestricted
)% , n, +ROG
n = 1. Enable
2. Disable
Bearer Capability unrestricted digital Information 2x64kbps.
202-16 B Channel Selection
)% , n, +ROG
n = 1. Exclusive
2. Preferred
3. Any Channel
B Channel selected originating method.
202-17 Idle B Channel
Selection
)% , n, +ROG
n = 1. Forward Cyclic
2. Backward Cyclic
3. Forward Terminal
4. Backward Terminal
Idle B Channel selection method.
202-18 Interdigit Timer 1
)% , n, +ROG
n = 1~180 Interdigit1 Timer
202-19 Interdigit Timer 2
)% , n, +ROG
n = 1~180 Interdigit2 Timer
202-20 CESID
)% , n, +ROG
n = Up to 16 digits Enter the Caller Emergency Services Identification (CESID) for E911
calls.
202-21 Number Voice Calls
Allowed
)% , n, +ROG
n = 1. One
2. Two
Voice Call Allowed Number for Interface.
Table 13-14 Programs 200~202 (continued)
Button Sequence Value(s) Summary