Station
ISDN
5-40 Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
217 ISDN Station Data
Prerequisite Program: 202 page 5-36
Set ISDN Station parameters to define ISDN capabilities.
1. Complete the “ISDN Station Data
Record Sheet” on page D-20.
2. From the Program Menu, click
Station > ISDN > Station Data.
The ISDN Individual Station Data
Assignment screen displays
(shown right).
3. Enter a Primary DN for an
existing record
...or click one of the following
buttons:
• List – view a summary list of
programmed Hunt Groups.
• Copy – Enter a DN in the Primary DN field and click Copy to make a new DN assignment with BRI
Station settings copied from the DN entered in the Primary DN field.
4. Set up ISDN Station Data using the Program Detail table below.
5. Click Submit.
FIELD DESCRIPTION
Primary DN Enter Primary DN.
Possible values: Up to 5 digits (default = no value)
01 Station Name Enter a name for this station.
Possible values: Up to 9 ASCII characters (default = no value)
02 Dial Method Select the audible tone when dialing.
Possible values: Dial Tone (default), Entry Tone or No Tone
03 System Call Forward Select the System Call Forward assignment for this station.
Possible values: 0~32 (default = 0)
04 CF Password Protect the System Call Forward settings by creating a password.
Possible values: Up to 4 digits (default = no value)
05 Door Phone Override
DND
Enable the Door Phone ringing indicator to override Do Not Disturb.
Possible values: Enable or Disable (default)
06 Emerg Call Group Select this station’s emergency call group.
Possible values: 1~8 (default = 1)
07 COS Override Code Enable Class of Service override.
Possible values: Enable or Disable (default)
08 Display DN Enter the DN to be displayed on the LCD.
Possible values: Up to 5 digits (default = no value)
To Next Page
Loading...
