Toshiba CTX100-S - Set Time and Date

Telephone Button Programming
900 Series Programs
Strata CTX Programming - Part 3: Telephone Button Programming 11/03 13-99
Telephone Button
Programming
• Installed Equipment ID – There are five characters, each referencing a unique equipment
identification value assigned to hardware installed in your Strata CTX system. If the particular
hardware is not installed a “-” displays. The following are the equipment identifier designations.
• B – BBMS is installed.
• X – BEXS is installed.
• S – BSIS is installed.
• E – The Ethernet is installed.
• M – The Modem is installed.
Set Time and Date
This program enables you to change the system clock in Strata CTX.
Program Number(s): 902
Prerequisite Program:
None
Reference: None
Access Sequence: Login to programming mode from your telephone button pad:
+ROG✱✱✱✱✱.
At the PASSWORD= prompt, Enter your password and press+ROG.
At the PROG= prompt enter  and press +ROG.
1. Press )% to enter current Strata CTX Date. See table above for format.
2. Press
+ROG to program.
3. Press
)% to enter current Strata CTX time. See table above for format.
4. Press
+ROG to program.
5. Press
+ROG to submit, then +ROG to return to the PROG= prompt.
6. Enter another program number to continue programming or press
+ROG again to exit programming
mode.
Event Trace Control
This program enables you to trace message events occurring in Strata CTX.
Program Number(s): 903
Prerequisite Program:
None
Reference: Install SmartMedia card
Access Sequence: Login to programming mode from your telephone button pad:
+ROG✱✱✱✱✱.
FB Name FB Summary Value LCD Prompt
Date 01
Enter current system date in this field.
yymmdd format
yy = current year
mm = current month
dd = current day
DATE=
Time
02
Enter the current time in this field.
hhmmss format
hh = current hour
mm = current minute
ss = current second
TIME=