Station
Multiple Call Group
5-32 Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
Call Forward Activation
System and Station Call Forward can be set up for each MC Group. The Call Forward Remote Access
Code is used to activate or de-activate Station Call Forward of MC Group. System Call Forward is
activated/deactivated using CTX WinAdmin. The MC Group can also be set as the destination of System
on Station Call Forward.
517 Multiple Call Group Assignment
Multiple Call/Delayed Ringing which enables you to delay ring to voice mail and auto attendants.
1. From the Program Menu, click
Station > Multiple Calling Group.
2. Click Create. A dialog box displays.
3. Enter a calling group index in the
dialog box.
The calling group index can be 1~16
(CTX100), 1~32 (CTX670 Basic),
and 1~64 (CTX670 Expanded).
4. Click Ok. Parameter 01 MC Group
Pilot Number gets highlighted.
5. Enter the DN of the MC group. This
number should not conflict with an
existing telephone number.
6. Verify and change other parameters.
7. Click Submit. The group index displays on the left of the program name.
FIELD DESCRIPTION
Multiple Call Group Number Select a group number.
Possible values: 1~16 (CTX100), 1~32 (CTX670 Basic) and 1~64 (CTX670
Exp.)
01 MC Group Pilot Number Enter the Pilot Directory Number that should be assigned to the Multiple Call
Group. This can be any number 1~5 digits that does not conflict with numbers
in the current system Number Plan.
Possible values: 1~5 digits
02 Ring Delay 1 Timer Set the timer in seconds.
Possible values: 1~180
03 Ring Delay 2 Timer Set the timer in seconds.
Possible values: 1~180
04 System Call Forward Assign a System Call Forward template number to the multiple calling group.
Enter 0 or 1~32.
Possible values: 0~32
05 Voice Mail ID Enter the VM call forward ID digits for the Multiple Calling Group.
Possible values: Up to 10 digits.
To Next Page
Loading...
