e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C © 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved
SELF-DIAGNOSTIC MODE
2 - 80
Fuser
[Temperature] 409, 410-0 to 3, 412-0 to 1,
413-0 to 1, 434-0 to 1,
437-0 to 1, 438, 448,
450-0 to 3, 451-0 to 1, 452,
453, 518-0 to 1, 531-0 to 1,
534-0 to 4, 1902, 1903,
1904, 2017-0 to 3,
2018-0 to 3, 2019-0 to 3,
2151-0 to 3, 2153-0 to 1,
2155-0 to 1, 2159-0 to 1,
2161, 2255, 4545,
5241-0 to 3, 5277-0 to 5,
5285-0 to 3, 5293-0 to 3,
5294-0 to 3, 5295-0 to 3,
5296-0 to 3, 5409-0 to 1,
5410-0 to 1
[Intermittence setting] 5449-0 to 6
[Status counter] 400
[Fuser reverse rotation
setting]
4569
[Pre-running] 417-0 to 1, 439-0 to 1,
440-0 to 1, 441-0 to 1,
461-0 to 4, 517, 526, 584,
855, 2020-0 to 3,
5280-0 to 1, 5299-0 to 1,
5308-0 to 1, 5309-0 to 1,
5310-0 to 3
[Fuser unit] 4549
[Fuser unit voltage
determination]
4591
Image processing
[Counter] 1371, 1372, 1378, 1380,
1382, 1383, 1385, 1386,
1387, 1388
RADF [Switchback] 462
Finisher
[Stapling] 704-0 to 1, 1911, 9811-0 to 3,
9937-0 to 3, 9938-0 to 3
[Hole punching] 9847
[Finisher model switching] 1912
Classification
Setting Mode (08)
Given in the Service
Manual
Given in the Service
Manual and Service
Handbook
To Next Page
Loading...
Need help?
General
