Toshiba e-studio2507 - Page 124

e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A © 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 4
4.1.6 Toner supply cover
4.1.7 Tray front cover
4.1.8 Tray rear cover
(1) Take off the right front cover.
 P. 4-2 "4.1.4 Right front cover"
(2) Take off the left front cover.
 P. 4-3 "4.1.5 Left front cover"
(3) Take off the toner supply cover [1].
Fig. 4-10
(1) Take off the inner tray.
 P. 4-2 "4.1.3 Inner tray"
(2) Take off the right front cover.
 P. 4-2 "4.1.4 Right front cover"
(3) Take off the tray front cover [1].
Fig. 4-11
(1) Take off the inner tray.
 P. 4-2 "4.1.3 Inner tray"
(2) Take off the tray rear cover [1].
Notes:
When installing the tray rear cover, hook the
hole of the tray rear cover on the hook of the
frame.
Fig. 4-12
[1]
[1]
[1]