e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 88
4.8.10 Center thermistor (THMS1) / Side thermistor (THMS2) /
Edge thermistor (THMS3)
(3) Do not loosen the screw with the white
markings that is holding the thermostat.
Fig. 4-234
(1) Take off the fuser unit.
P. 4-77 "4.8.1 Fuser unit"
(2) Remove each 1 screw of the thermistors,
and then take off each thermistor [1] by
releasing its harness out of the harness
guide.
Fig. 4-235
[1][1]
To Next Page
Loading...
