Toshiba e-studio2507 - Automatic Duplexing Unit (ADU): Option <20 L;23 L;25 L;20 H;23 H;25 H>

e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A © 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 116
4.10 Automatic duplexing unit (ADU): Option
<20L/23L/25L/20H/23H/25H>
4.10.1 Automatic duplexing unit (ADU)
(1) Turn off the main power switch and unplug
the power cable from the outlet.
(2) Open the right cover.
(3) Remove the duct unit.
 P. 4-35 "4.6.3 Duct unit"
(4) Unplug 1 connector [1] of the ADU.
Fig. 4-309
(5) Remove 1 screw.
When attaching the earth, run the earth wire
around [2] as shown in the figure.
Fig. 4-310
(6) Remove 2 screws and remove the ADU [3].
Fig. 4-311
[1]
[2]
[3]