5
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
SELF-DIAGNOSIS MODES
5 - 15
5.9 List Print Mode (9S)
5.9.1 Operation procedure
Print output
You can select the drawer from which to print a list.
<Procedure>
1. [9]+[START]+[POWER].
2. Use the [Arrow] buttons to select “DRAWER” and then press [OK].
3. Use the [Arrow] buttons to select “DRAWER 1” and then press [OK].
CSV output (USB)
Notes: Precautions when storing information into USB device
• When storing the setting information of the equipment into a USB device, be sure to obtain
permission from a user in advance.
• When storing the setting information of the equipment into a USB device, the information is
printed out in a CSV format. Handle and manage the information with extra care.
• Do not lose or leak the setting information of the equipment.
• Do not use the setting information of the equipment for purposes other than maintenance or
product services.
• Provide the information promptly if a user requires so.
• The buttons on the control panel keep blinking while data are being stored in the USB device.
Do not disconnect the USB device while data are being stored.
[9][START]
[POWER]
<20L/23L/25L, 23LA/23LM/28LM>
101: Adjustment mode (05)
102: Setting mode (08)
(Code)
103: PM support mode
106: Error history (Maximum 30 items)
108: Firmware update log (Maximum 5 items)
111: Version list
114: Total counter list
<
20H/23H/25H, 23HA/28HA
>
101: Adjustment mode (05)
102: Setting mode (08)
403: 13 code list
(Code)
103: PM support mode
106: Error history (Maximum 30 items)
108: Firmware update log (Maximum 5 items)
111: Version list
114: Total counter list
400: Protocol trace list
401: Service data list
[Digital keys]
Key in the start
code to be printed
[Digital keys]
Key in the end
code to be printed
[POWER]
OFF/ON
(Exit)
[START]
List starts to
be printed
[START]
Select
“Enter the code”
using the arrow
button.(Select)
[START]
(Code)
[OK]
[9][START]
[POWER]
(Code)
<20L/23L/25L, 23LA/23LM/28LM>
201: Adjustment mode (05)
202: Setting mode (08)
<20H/23H/25H, 23HA/28HA>
201: Adjustment mode (05)
202: Setting mode (08)
503: 13 code list
(Code)
203: PM support mode
206: Error history (Maximum 30 items)
208: Firmware update log (Maximum 5 items)
211: Version list
214: Total counter list
300: All CSV files
(Code)
203: PM support mode
206: Error history (Maximum 30 items)
208: Firmware update log (Maximum 5 items)
211: Version list
214: Total counter list
500: Protocol trace list
501: Service data list
300: All CSV files
[Digital keys]
Key in the first
code to be printed
[Digital keys]
Key in the last
code to be printed
[POWER]
OFF/ON
(Exit)
Connect
USB
Disconnect
USB
[START]
List starts to
be printed
[START] [START]
To Next Page
Loading...
