Toshiba e-studio2507 - Automatic Duplexing Unit (ADU)

4
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
DISASSEMBLY AND REPLACEMENT
4 - 123
4.11 Automatic duplexing unit (ADU): <23LA/23LM/28LM/23HA/
28HA>
4.11.1 Automatic duplexing unit (ADU)
(1) Turn off the main power switch and unplug
the power cable from the outlet.
(2) Open the right cover.
(3) Remove the duct unit.
 P. 4-35 "4.6.3 Duct unit"
(4) Unplug 1 connector [1] of the ADU.
Fig. 4-327
(5) Remove 1 screw.
When attaching the earth, run the earth wire
around [2] as shown in the figure.
Fig. 4-328
(6) Remove 2 screws and remove the ADU [3].
Fig. 4-329
[1]
[2]
[3]