Toshiba e-studio2507 - Paper Exit Motor (M6)

4
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
DISASSEMBLY AND REPLACEMENT
4 - 125
4.11.4 Paper exit motor (M6)
(1) Take off the rear cover.
 P. 4-6 "4.1.10 Rear cover <23LA/23LM/
28LM/23HA/28HA>"
(2) Disconnect 1 connector [1], remove 4 screws
and take off the exit motor bracket [2].
Fig. 4-332
(3) Remove 2 screws and take off the exit motor
(M6) [3].
Fig. 4-333
[1]
[2]
[3]