Toshiba e-studio2507 - Image Quality Adjustment (Scanning Function)

6
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
SETTING / ADJUSTMENT
6 - 31
6.6 Image Quality Adjustment (Scanning Function)
6.6.1 Gamma balance adjustment
The density is adjusted by adjusting the gamma balance. The adjustment is performed by selecting its
density area from the following: low density, medium density and high density.
<Adjustment Mode (05)>
Notes:
Changing the adjustment setting influences the adjacent density area slightly.
E.g.: When the value of the medium density is larger, the adjacent areas in the low density and
high density range will become slightly darker.
<Procedure>
Procedure is same as that of  P. 6-26 "6.4.5 Gamma balance adjustment".
Black
Gray
Scale
Item to be
adjusted
RemarksOriginal mode
Text/Photo Text Photo
7485-0 7486-0 7487-0 7488-0 Low density The larger the value is, the density of
the item to be adjusted becomes darker.
Acceptable values:
0 to 255 (Default: 128)
7485-1 7486-1 7487-1 7488-1 Medium density
7485-2 7486-2 7487-2 7488-2 High density