Toshiba e-studio2507 - Pressure Roller

e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A © 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 84
4.8.7 Pressure roller
Notes:
There is five separation finger.
Fig. 4-223
(1) Take off the base unit.
 P. 4-82 "4.8.5 Base unit"
(2) Remove 2 springs [1].
(3) Take off 2 pressure levers [2].
Fig. 4-224
(4) Take off 2 arms [3].
Fig. 4-225
[2]
[1]
[1]
[2]
[3]