4
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
DISASSEMBLY AND REPLACEMENT
4 - 27
4.3.8 Automatic original detection sensor-1 (S9) / Automatic original
detection sensor-2 (S10) <20H/23H/25H, 23HA/28HA only>
(1) Take off the original glass.
P. 4-15 "4.3.1 Original glass"
(2) Remove the 1 connector [1], release 2
latches and the automatic original detection
sensor-1 (S9) [2].
Fig. 4-68
(3) Remove the 1 connector [3], release 3
latches and the automatic original detection
sensor-2 (S10) [4].
Fig. 4-69
[1]
[2]
[4]
[3]
To Next Page
Loading...
