2
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
2 - 3
Automatic duplexing unit ......... Stackless, Switchback type
Uses an exclusive switchback mechanism
Acceptable paper size
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, 8K, 16K, 16K-R, LD,
LG, LT, LT-R, ST-R, COMPUTER, 13"LG, 8.5" x 8.5"
Acceptable paper weight
64 - 80 g/m
2
(17 - 20 lb. Bond)
Interface .................................. Standard:
USB 2.0 (High Speed), Ethernet (10Base-T/100Base-TX)
Toner supply ............................ Toner cartridge refill method
Toner density control ............... Magnetic auto-toner method
Memory (RAM) ........................ Main memory: <20L/23L/25L> 256MB (Incl. page memory)
<20H/23H/25H> 512MB (Incl. page memory)
<23LA/23LM/28LM/23HA/28HA>
512MB (Incl. page memory)
Warming-up time ..................... <20L/23L/25L/20H/23H/25H> Approx. 20 sec. (temperature: 20°C)
<23LA/23LM/28LM/23HA/28HA> Approx. 18 sec. (temperature: 20°C)
Power requirements ................ AC 120 V, 220-240 V (50/60 Hz), AC 110 V (60 Hz)
* The acceptable value of each voltage is ±10%.
Power consumption................. 1.5 kW or less
Sleep mode: 1 W or less (When the damp heater is OFF)
* The electric power is supplied to the RADF, ADU and PFU through the equipment.
Total counter............................ Electronical counter
Dimensions of the equipment............ See the figure below W575 x D565 (base is 540) x H 402 (mm)
Fig. 2-1
575
402
565
To Next Page
Loading...
