2.SETTING ITEMS (ADMIN)
NETWORK 83
2 SETTING ITEMS (ADMIN)
2
Specify the following items as required and press .
When you select [ENABLE] for the [ENABLE DHCP (IP Address)] option, [ENABLE] is automatically set for the
[ENABLE DHCP (OPTIONS)] option.
3
Confirm the settings and press .
The IPv6 addresses acquired from routers are displayed. Up to seven IPv6 addresses can be retained.
When this equipment receives a router advertisement (RA) from a router with the M flag set to “0”, the DHCPv6
function is disabled. When the router advertisement (RA) M flag setting is changed from “0” to “1” with the
router settings, reboot this equipment by using the [POWER] button on the control panel to enable the DHCPv6
function.
Item name Description
ENABLE DHCP (IP
Address)
ENABLE — Press this button to use the IPv6 address issued by the DHCPv6 server.
DISABLE — Press this button to disable the IPv6 address issued by the DHCPv6 server.
ENABLE DHCP
(OPTIONS)
ENABLE — Press this button to use the optional information (IPv6 address for the DNS
server, etc.) other than the IPv6 address for this equipment issued by the DHCPv6 server.
DISABLE — Press this button to not use the optional information other than the IPv6 address
for this equipment issued by the DHCPv6 server.
FQDN Option ENABLE — Press this button to assign a FQDN (Fully Qualified Domain Name) using the
DNS server.
DISABLE — Press this button to not assign a FQDN using the DNS server.
FQDN Update Method CLIENT — Press this button to update the DNS server from this equipment.
SERVER — Press this button to update the DNS server from the DHCPv6 server.
To Next Page
Loading...
Need help?
General
