November 2003 © TOSHIBA TEC 6 - 41 e-STUDIO3511/4511 FIRMWARE UPDATING
(11) Select the data file to be updated and click the [OK] button.
There are two data filing methods: Selecting the multiple data files in a batch (select the folder
where the files are saved) and selecting each data file individually.
• Selecting the multiple data files in a batch
a. Select “Download File Folder”.
b. Click the [Browse] button and select the folder where the files are saved.
• Selecting each data file individually
a. Select “File Name Conversion”.
b. Click the [Browse] button of each data and select the file. When “Generic Driver” is used,
check the checkbox of the file to be selected.
To Next Page
Loading...
