e-STUDIO3511/4511 FIRMWARE UPDATING 6 - 42 November 2003 © TOSHIBA TEC
Tip:
When selecting the multiple files in a batch, the name of the unselected data file (not saved in the folder) may
be displayed. In this case, click the [OK] button and then the update of all files except the displayed file starts.
(12) The selected data is transmitted to the equipment.
The data file name being transmitted and transmission condition are displayed at the bottom.
Tip:
During transmission, the message “WAIT” or “NOW SERVICING” is displayed on the LCD screen of the equip-
ment. In this case, all the button operations are locked.
(13) When the data transmission is completed, the following screen is displayed. Then click the [OK]
button.
To Next Page
Loading...
