November 2003 © TOSHIBA TEC 6 - 51 e-STUDIO3511/4511 FIRMWARE UPDATING
(6) Select the item with the digital keys.
“*” is displayed next to the selected item. Display or delete the “*” by pressing the number of the
item. All items are selected in the default settings.
• Select all items to update the firmware of the equipment in a batch.
• Select items as follows to update individually.
<Updating Master data>
Select “1. HDD Update” only.
<Updating System ROM>
Select “2. UI Data Update” and “3. System Firmware Update”.
<Updating Engine ROM>
Select “6. Machine Firmware Update” only.
<Updating Scanner ROM>
Select “5. Scanner Firmware Update” only.
<Updating NIC ROM>
Select “4. NIC Firmware Update” only.
Example: Updating the master data and system ROM
(Updating the master data and system ROM is taken as an example and explained.)
04/10
To Next Page
Loading...
