e-STUDIO3511/4511 FIRMWARE UPDATING 6 - 52 November 2003 © TOSHIBA TEC
(7) Press the [START] button.
Updating starts and the processing status is displayed on the LCD screen. When the multiple
items are selected, updating starts in order of item number.
(8) “Update Completed.” is displayed at the bottom of the LCD screen after the updating is
completed properly.
Tip:
Updating can be continued with another USB storage device on which the firmware data is written in the follow-
ing procedure when the updating is completed.
a. Confirm the message “Please Connect Next Storage Key. Push ‘START’ Button!!” is displayed at the bottom
of the LCD screen.
b. Replace the USB storage device while the power is left ON.
c. Press the [START] button.
d. The screen for selecting the items to be updated is displayed. Continue the updating from procedure (6).
However, the items already updated are not displayed on the screen.
To Next Page
Loading...
