2.SETTING ITEMS (ADMIN)
Setting General Functions 91
2 SETTING ITEMS (ADMIN)
Setting the print calibration
1
Press the following buttons as required.
For e-STUDIO4520C Series
Press [PRINT].
For e-STUDIO6530C Series
Press either of the following buttons.
y [600dpi PRINT]
Press this button to calibrate for the 600 dpi print jobs.
y [1200dpi PRINT]
Press this button to calibrate for the 1200 dpi print jobs.
2
Press [DEFAULT] to set the default calibration setting, or [CALIBRATION] to adjust the
calibration setting.
y When you press [DEFAULT], the system maintains the default calibration setting and returns to the previous
screen.
y When you press [CALIBRATION], a chart is printed out and the calibration guide illustration is displayed on the
touch panel.
To Next Page
Loading...
