3
March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 COPY PROCESS
3 - 7
A full block in the figure below denotes approx. 10,000 copies.
Fig.3-14
(6) Transfer/Separation
Transfer:
Transfer is a process of transferring the toner image (visible image) formed on the drum surface
onto the paper.
An electric charge applied by the high voltage power supply flows to the transfer belt from the
power supply roller. Then it flows to the paper and photo conductor. The toner, which has been
developed on the photo conductor, is transferred to this paper with an electric charge.
Fig.3-15
A B C A A
Type of originals
A B C
Block
Paper
Transfer
belt
Drum
To Next Page
Loading...
