e-STUDIO520/600/720/850 COPY PROCESS March 2005 © TOSHIBA TEC
3 - 8
Separation:
The paper is absorbed to the belt and separated from the drum by the electrostatic attraction act-
ing between the belt (plus charge) and the polarization charge (minus charge) on the bottom sur-
face of the paper.
Fig.3-16
Reference
• Combined use of transfer belt and separation
finger
To prevent the copy paper from failing to be
separated during the operation, due to incom-
plete transfer belt charging or absorption of
moisture, and thus jamming up the cleaner, a
separation finger mechanically separates any
copy paper which fails to be separated.
Fig.3-17
Drum
Paper
Transfer belt
Power supply roller
Toner
E
A
l
u
m
i
n
u
m
c
o
n
d
u
c
t
i
v
e
b
a
s
e
P
h
o
t
o
c
o
n
d
u
c
t
i
v
e
l
a
y
e
r
Transfer belt
Paper movement
Separation finger
Rotation of drum
To Next Page
Loading...
