The default setting is On.
Screen Color Setting
You can select the screen color among from five types.
The default setting is [Blue Type].
Output: Copier (copier)
Specify a tray to which document are delivered.
The default setting can vary depending on which options are attached.
Output: Document Server (Document Server)
Specify a tray to which document are delivered.
The default setting can vary depending on which options are attached.
Output: Printer (printer)
Specify a tray to which document are delivered.
The default setting can vary depending on which options are attached.
Paper Tray Priority: Copier
Specify a tray to supply paper for output.
The default setting is Tray 1.
Paper Tray Priority: Printer
Specify a tray to supply paper for output.
The default setting is Tray 1.
System Status/Job List Display Time
Specify how long to display the System Status and Job List display for.
The default setting is [On], "15" second (s).
By selecting [On], you can specify a display time between 10 and 999 seconds.
Time Interval between Printing Jobs
Specify interval time after printing is completed until starting the next printing.
The default setting is [Set Time], "3" second (s).
By selecting [Set Time], you can specify an interval time between 0 and 999 seconds.
ADF Original Table Elevation
You can set the timing for elevating the ADF original table.
The default setting is [When Original is Set].
ADF Feed Speed
When you use thick paper, you can slow down the printing speed to avoid fusing the image by
selecting [Slow].
General Features
21
To Next Page
Loading...
