Transfer Log Setting
This function is not available with this machine.
Fixed USB Port
You can specify whether or not to fix the USB port.
The default setting is [Off].
If a computer with the printer driver installed is connected through USB to another printer of the same
model, selecting [Level 1] for this option eliminates the need for reinstallation of the driver. If you want
to select [Level 2], contact your sales or service representative.
Machine Data Encryption Settings
For details about this function, consult your administrator.
Print Backup: Delete All Files
For details about this function, consult your administrator.
Print Backup: Default Format
For details about this function, consult your administrator.
Print Backup: Default Resolution
For details about this function, consult your administrator.
Print Backup: Default User Name
For details about this function, consult your administrator.
Print Backup: Compression
For details about this function, consult your administrator.
Data Carry-over Setting for Address Book Auto-program
With the Address Book Auto-program function, you can specify whether or not the user authentication
policy is carried over from the user information registered under "Windows Authentication" or "LDAP
Authentication":
• [Carry-over Data]
• [Do not Carry-over]
If you select [Carry-over Data], you must then specify the data you want to carry over by entering the
relevant registration number.
For details about Windows Authentication or LDAP Authentication, consult your administrator.
• p.17 "Accessing User Tools"
• p.52 "Programming the LDAP server"
• p.58 "Programming the Realm"
Administrator Tools
51
To Next Page
Loading...
