Toshiba e-studio905 - Page 99

• In connect copy, only the paper tray corresponding to the paper size, orientation, and type that
are set in common on the main and sub-machines can be used. To make the most of the connect
copy function, it is advisable that you make the same paper settings on both the main and sub-
machines.
Paper Size: Tray 4 (with the optional Wide Large Capacity Tray)
• The main and sub-machines follow their respective set values.
• In connect copy, only the paper tray corresponding to the paper size, orientation, and type that
are set in common on the main and sub-machines can be used. To make the most of the connect
copy function, it is advisable that you make the same paper settings on both the main and sub-
machines.
Paper Size: Tray 5 (with the optional Large Capacity Tray)
• The main and sub-machines follow their respective set values.
• In connect copy, only the paper tray corresponding to the paper size, orientation, and type that
are set in common on the main and sub-machines can be used. To make the most of the connect
copy function, it is advisable that you make the same paper settings on both the main and sub-
machines.
Paper Size: Tray 5 (with the optional Wide Large Capacity Tray)
• The main and sub-machines follow their respective set values.
• In connect copy, only the paper tray corresponding to the paper size, orientation, and type that
are set in common on the main and sub-machines can be used. To make the most of the connect
copy function, it is advisable that you make the same paper settings on both the main and sub-
machines.
Paper Size: Tray 6 (with the optional Large Capacity Tray)
• The main and sub-machines follow their respective set values.
• In connect copy, only the paper tray corresponding to the paper size, orientation, and type that
are set in common on the main and sub-machines can be used. To make the most of the connect
copy function, it is advisable that you make the same paper settings on both the main and sub-
machines.
Paper Size: Tray 6 (with the optional Wide Large Capacity Tray)
• The main and sub-machines follow their respective set values.
• In connect copy, only the paper tray corresponding to the paper size, orientation, and type that
are set in common on the main and sub-machines can be used. To make the most of the connect
copy function, it is advisable that you make the same paper settings on both the main and sub-
machines.
Paper Size: Tray 7 (with the optional Multi Bypass Tray and LCT)
• The Tray 7 on both of the main and sub-machines are used only for the cover sheet and the
designation sheet.
Tray Paper Setting on Main and Sub-machines
97
2