170 GX9 ASD Installation and Operation Manual
Pattern Run Disposition
Program Frequency Pattern Run
This parameter sets the start condition of subsequent Pattern Runs after the
initial Pattern Run has been terminated or has completed its programming.
Settings:
0 — Pattern Run Canceled After Stop
1 — Pattern Run Continued After Stop
Direct Access Number — F521
Parameter Type — Selection List
Factory Default — Pattern Run
Canceled After Stop
Changeable During Run — No
Pattern Run Group 1 Repeat Factor
Program Frequency Pattern Run
This parameter sets the number of times that the pattern defined in Group 1
will be run.
Direct Access Number — F530
Parameter Type — Numerical
Factory Default — 1
Changeable During Run — No
Minimum — 1
Maximum — 255 (Infinite)
Units — Repetitions
Pattern Run Group 1 Selection 1
Program Frequency Pattern Run
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 1 selection to be included in the Group 1 Selection.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 – 15 Preset Speed Number
Direct Access Number — F531
Parameter Type — Selection List
Factory Default — Preset Speed 1
Changeable During Run — No
Pattern Run Group 1 Selection 2
Program Frequency Pattern Run
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 2 selection to be included in the Group 1 Selection.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 – 15 Preset Speed Number
Direct Access Number — F532
Parameter Type — Selection List
Factory Default — Preset Speed 2
Changeable During Run — No
Pattern Run Group 1 Selection 3
Program Frequency Pattern Run
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 3 selection to be included in the Group 1 Selection.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 – 15 Preset Speed Number
Direct Access Number — F533
Parameter Type — Selection List
Factory Default — Preset Speed 3
Changeable During Run — No
F521 F533
To Next Page
Loading...
