Toshiba GX9 - Page 183

GX9 ASD Installation and Operation Manual 171
Pattern Run Group 1 Selection 4
Program Frequency Pattern Run
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 4 selection to be included in the Group 1 Selection.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 – 15 Preset Speed Number
Direct Access Number — F534
Parameter Type — Selection List
Factory Default — Preset Speed 4
Changeable During Run — No
Pattern Run Group 1 Selection 5
Program Frequency Pattern Run
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 5 selection to be included in the Group 1 Selection.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 – 15 Preset Speed Number
Direct Access Number — F535
Parameter Type — Selection List
Factory Default — Preset Speed 5
Changeable During Run — No
Pattern Run Group 1 Selection 6
Program Frequency Pattern Run
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 6 selection to be included in the Group 1 Selection.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 – 15 Preset Speed Number
Direct Access Number — F536
Parameter Type — Selection List
Factory Default — Preset Speed 6
Changeable During Run — No
Pattern Run Group 1 Selection 7
Program Frequency Pattern Run
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 7 selection to be included in the Group 1 Selection.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 — 15 Preset Speed Number
Direct Access Number — F537
Parameter Type — Selection List
Factory Default — Preset Speed 7
Changeable During Run — No
Pattern Run Group 1 Selection 8
Program Frequency Pattern Run
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 8 selection to be included in the Group 1 Selection.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 — 15 Preset Speed Number
Direct Access Number — F538
Parameter Type — Selection List
Factory Default — Preset Speed 8
Changeable During Run — No
F534 F538