172 GX9 ASD Installation and Operation Manual
Pattern Run Group 2 Repeat Factor
Program Frequency Pattern Run
This parameter sets the number of times that the pattern defined in Group 2will
be run.
Direct Access Number — F540
Parameter Type — Numerical
Factory Default — 1
Changeable During Run — No
Minimum — 1
Maximum — 255 (Infinite)
Units — Repetitions
Pattern Run Group 2 Selection 1
Program Frequency Pattern Run
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 1 selection to be included in the Group 2 Selection.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 – 15 Preset Speed Number
Direct Access Number — F541
Parameter Type — Selection List
Factory Default — Preset Speed 9
Changeable During Run — No
Pattern Run Group 2 Selection 2
Program Frequency Pattern Run
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 2 selection to be included in the Group 2 Selection.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 — 15 Preset Speed Number
Direct Access Number — F542
Parameter Type — Selection List
Factory Default — Preset Speed 10
Changeable During Run — No
Pattern Run Group 2 Selection 3
Program Frequency Pattern Run
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 3 selection to be included in the Group 2 Selection.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 – 15 Preset Speed Number
Direct Access Number — F543
Parameter Type — Selection List
Factory Default — Preset Speed 11
Changeable During Run — No
Pattern Run Group 2 Selection 4
Program Frequency Pattern Run
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 4 selection to be included in the Group 2 Selection.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 — 15 Preset Speed Number
Direct Access Number — F544
Parameter Type — Selection List
Factory Default — Preset Speed 12
Changeable During Run — No
F540 F544
To Next Page
Loading...
