Toshiba GX9 - Page 58

46 GX9 ASD Installation and Operation Manual
U TILITIES
Display Parameters
Free Unit Multiplication Factor F702
Free Unit Display Resolution F703
Acceleration/Deceleration Unit Time Setup F704
Language N/A
Display the Startup Wizard at Next Power Up N/A
Main Monitor Selections
Monitor 1 N/A
Monitor 2 N/A
Real-Time Clock Setup
Time/Date Setting N/A
Changed From Default
See the section titled Default Setting
Changes on pg. 61.
N/A
Save/Restore Wizard
Save or Restore EOI User Settings N/A
Prohibition
Prohibited
Local/Remote Key Command Override N/A
Local/Remote Key Frequency Override N/A
Skip Uninitialized Parameters in the Changed
From Default Window
N/A
Prohibit Initializing User Parameters During
Typeform Initialization
F709
Alarm Prohibition
Over-Current Alarm N/A
ASD Overload Alarm N/A
Motor Overload Alarm N/A
Over-Heat Alarm N/A
Over-Voltage Alarm N/A
Main Circuit Low Voltage (MOFF) N/A
Control Circuit Low Voltage (POFF) N/A
Under-Current Alarm N/A
Over-Torque Alarm N/A
DBR Overload Alarm N/A
Cumulative Run Timer Alarm N/A
Communication Alarm 1 (Scan Transmission) N/A
Communication Alarm 2 (TTL/RS232/RS485
Transmission)
N/A
Retry Alarm N/A
Fault Alarm N/A
Point Setting Error Alarm N/A
Earth Fault Alarm N/A
PID Low Output Disable Alarm N/A
Virtual Linear Pump On N/A
Virtual Linear Pump Low Frequency N/A
Virtual Linear Pump No Flow N/A
Contrast
Use Rotary Encoder to Adjust N/A
Program Menu Navigation
Primary Menu Sub Menu Parameter Name
Parameter
Number
e
al-Time
l
ock