70 HX7+ ASD Installation and Operation Manual
S
PECIAL
C
ONTROL
Crane/Hoist Load
Heavy-Load Torque During Reverse
Acceleration
F339
Heavy-Load Torque During Fixed Speed
Reverse Run
F340
Frequency for Automatic High-Speed
Operation at Light Load
F341
V/f Five Point Setting
#1 Frequency Setting F190
#1 Voltage Setting F191
#2 Frequency Setting F192
#2 Voltage Setting F193
#3 Frequency Setting F194
#3 Voltage Setting F195
#4 Frequency Setting F196
#4 Voltage Setting F197
#5 Frequency Setting F198
#5 Voltage Setting F199
Low Output Disable
Function
LOD Control and Stopping Method F731
LOD Start Level F732
LOD Start Time F733
LOD Setpoint Boost F734
LOD Boost Time F735
LOD Feedback Level F736
LOD Restart Delay Time F740
Earth Fault
Earth Fault Alarm Level F640
Earth Fault Alarm Time F641
Earth Fault Trip Level F642
Earth Fault Trip Time F643
Special Parameters
V/f Adjustment Coefficient F183
0 Hz Dead Band Frequency Setting Signal F244
0 Hz Command Stop Function F255
Over-Exciting Cooperation F481
Stall Cooperation Gain at Field Weakening
Zone
F485
Exciting Starting Rate N/A
Compensation Coefficient for Iron Loss F487
Voltage Compensation Coefficient for Dead
Time
N/A
Dead Time Compensation F489
Dead Time Compensation Bias F490
Switching Frequency Between Current and
Vol tage
F491
Program Menu Navigation
Primary Menu Sub Menu Parameter Name
Parameter
Number
To Next Page
Loading...
