HX7+ ASD Installation and Operation Manual 69
M
ONITOR
S
ETUP
Trip History
Trip History Records N/A
Trip Monitor from ASD
Most Recent N/A
Second Most Recent N/A
Third Most Recent N/A
Fourth Most Recent N/A
M
ONITOR
S
ETUP
Scrolling Monitor
Scrolling Monitor N/A
S
PECIAL
C
ONTROL
Frequency Control
Start Frequency F240
End Frequency F243
Run Frequency F241
Run Frequency Hysteresis F242
Jump Frequencies
Jump Frequency Bandwidth Settings F271
Jump Frequency Processing Selection F276
Carrier Frequency
PWM Carrier Frequency Setting F300
Minimum Carrier Frequency 2.2 kHz F738
Accel/Decel #1 – #4
Accel/Decel/Pattern #1 Configuration F009
Accel/Decel/Pattern #2 Configuration F500
Accel/Decel/Pattern #3 Configuration F510
Accel/Decel/Pattern #4 Configuration F514
Accel/Decel Special
S-Pattern Lower Limit Adjustment F506
S-Pattern Upper Limit Adjustment F507
Accel/Decel Time Lower Limit F508
Accel/Decel Switching Frequency #1 F505
Accel/Decel Switching Frequency #2 F513
Accel/Decel Switching Frequency #3 F517
Accel/Decel Display Resolution F704
Crane/Hoist Load
Light-Load High-Speed Operation F330
Light-Load High-Speed Operation Switching
Lower Limit Frequency
F331
Light-Load High-Speed Operation Load
Waiting Time
F332
Light-Load High-Speed Operation Load
Detection Time
F333
Light-Load High-Speed Operation Heavy-
Load Detection Time
F334
Switching Load Torque During Forward Run F335
Heavy-Load Torque During Forward
Acceleration
F336
Heavy-Load Torque During Fixed Speed
Forward Run
F337
Switching Load Torque During Reverse Run F338
Program Menu Navigation
Primary Menu Sub Menu Parameter Name
Parameter
Number