Toshiba nv Series - Page 155

Appendix B Terminal Block Signal Conversion Adapter
6F8C1497
136
B
B.1 Overview
The terminal block signal conversion adapter is mounted in BUM7B for converting I/O
signals between G3 I/O and G2 I/O.
There are six models of terminal block signal conversion adapter:
EXM31 DI334→DI634 (For G3 I/O migration)
EXM32 DO334→DO634 (For G3 I/O migration)
EXM33 PI312→PI632 (For G3 I/O migration)
EXM34 AD368→AD668 (For G3 I/O migration)
EXM35 DA364→DA664 (For G3 I/O migration)
EXM36 DA374→DA664 (For G3 I/O migration)
Figure B.1 Exterior view of the terminal block signal conversion adapter
For details, refer to the relevant specifications.
G3 I/O terminal block
(Separately provided)
G2 I/O terminal block/connector
Terminal block signal
conversion ada
p
ter
Attached adapter
cab
l
e