Toshiba nv Series - Base Unit

T series Migration User’s Manual - Hardware -
35
2
2.2.2 Base Unit
The type1 light base unit, relevant to the S2T/S2E base unit, is selected using the T-PDS
conversion tool.
Table 2.13 S2T/S2E base unit conversion
After conversion
Before conversion
nv controller type1 light
BU648E BU643D BU668 BU666 BU664
T series
conversion
controller
S2T
BU648E ○ × × × ×
BU643D
○ ○ × × ×
S2E
BU668 ○ × ○ × ×
BU666 ○ × ○ ○ ×
BU664 × ○ ○ × ○
Expansion
BU668 × × ○ × ×
BU666 × × ○ ○ ×
BU664 × × ○ × ○
○: Selectable, ×: Not selectable
The base unit used for S2T/S2E and type1 light is the same model.
Be sure to select the same model when the base unit is converted.
Refer to the following manuals for the appearance and specification of the base unit:
･Integrated controller model 200 series
Sequence Controller S2 User’s Manual - Basic Hardware - (6F8C0836)
S2T User’s Manual - Basic Hardware - (6F8C0936)
S2E User’s Manual - Basic Hardware - (6F8C1094)
･Unified controller nv series
Unified controller nv series type1 light Controller Unit User’s Manual - Basic Hardware -
(6F8C1497)