Chapter 2 System Migration Procedures
6E8C5563
36
2
2.2.3 Power Supply Module
The power supply module used for conversion of S2T/S2E to unified controller type1
light is the same model (except that PS691/PS694/PS694M are not used in unified
controller type1 light).
Table 2.14 S2T/S2E power module conversion
After conversion
Before conversion
nv controller type1 light
PS693 PS632 PS652
Integrated
controller
model 2000
S2T/S2E
PS691 ○ × ×
PS693
○ × ×
PS694 ○ × ×
PS694M ○ × ×
PS632 × ○ ×
PS652 × × ○
○: Convertible, ×: Not convertible
S2T/S2E and type1 light use the same model of power supply module.
Be sure to use the same model power supply model.
Use PS693 for PS691/PS694/PS694M.
Refer to the following manuals for the appearance and specification of power supply
module:
・Integrated controller model 200 series
Sequence Controller S2 User’s Manual - Basic Hardware - (6F8C0836)
S2T User’s Manual - Basic Hardware - (6F8C0936)
S2E User’s Manual - Basic Hardware - (6F8C1094)
・Unified controller nv series
Unified controller nv series type1 light Controller Unit User’s Manual - Basic Hardware -
(6F8C1497)