Chapter 1 Overview of T Series Migration
6F8C1497
2
1.1 Overview
T series migration is to upgrade T series programmable controller PROSEC T2*/T3*
series and T series compatible controller S2E/S2T systems to unified controller type 1
light PUM11/PUM12 controllers. Main migration systems are listed below.
（1） T2* series (T2/T2E/T2N) systems
T2/T2E/T2N systems are upgraded to PUM11 systems.
The CPU module is upgraded to PUM11, the base unit to BU668/BU666/BU664
available for the same mounting position, and the I/O module (T2 I/O) to more
compatible G2 I/O module.
（2） S2E/S2T systems
S2E/S2T systems are upgraded to PUM11/PUM12 systems.
The CPU module is upgraded to PUM11/PUM12. The existing base unit and G2
I/O module can be used.
（3） T3* series (T3/T3H) systems
T3/T3H systems are upgraded to PUM11/PUM12 systems.
[Upgrading the I/O module (G3 I/O) to G2 I/O module]
The PU module is upgraded to PUM11/PUM12, the base unit to a type for
mounting the G2 I/O module, and I/O module (G3 I/O) to the functionally
compatible G2 I/O module.
【既存の入出力モジュール(G3 I/O)を使用する方法】
PU モジュールを PUM11/PUM12 に更新して、
既存の入出力モジュール(G3 I/O)を TC-net I/O Loop で接続し制御します。
T series system data, generated with T-PDS, can be converted to import data for
engineering tool using the “T-PDS conversion tool.” A new type1 light system can be
configured by importing this import data using the import function of the engineering tool.
Refer to “type1 light T series Migration Guide” (6F8C1587) for the method of use and
restrictions of the “T-PDS conversion tool.”
To Next Page
Loading...
