Chapter 1 Overview of T Series Migration
6F8C1497
16
1.4.7 Engineering Tool
Unified controller nv series/integrated controller V series engineering tool 4 (nV-Tool4)
(hereinafter referred to as the “engineering tool”) (V4.11.18 and later) is applicable to T
series migration systems. The T-PDS conversion tool in the install folder of engineering
tool supports the conversion of system data generated with T-PDS of T2/T3 series and
S2E/S2T to system data for type1 light PUM11/PUM12 controller. Use this function by
confirming restrictions.
Table 1.19 Engineering tools for T series migration systems
Model Product code Name Remark
ET81J4 HET81J4SS nV-Tool4 Japanese standalone version
ET82J4 HET82J4SS nV-Tool4 Japanese client server version
ET81E4 HET81E4SS nV-Tool4 English standalone version
ET82E4 HET82E4SS nV-Tool4 English client server version
Refer to the following related manuals for the engineering tools and T-PDS conversion
tools:
Document
No.
Document name
6F8C1291 Unified Controller nv Series / Integrated Controller V Series Engineering
Tool 4 Operation Manual -Setup-
6F8C1290 Unified Controller nv Series / Integrated Controller V Series Engineering
Tool 4 Operation Manual -Basic-
6F8C1226 Unified Controller nv Series/V Series Programming Instructions (LD/FBD/SFC/ST)
6F8C1587 Unified Controller nv Series type 1 light T series Migration Guide
To Next Page
Loading...
