T series Migration User’s Manual - Hardware -
25
2
*1: DI41 and DI643 have different terminal block arrangement.
*2: DI32 and DO32 are 24-pin x 2 connector. DI234 and DO234 are 40-pin connector
x 1. The shape and arrangement differs from one another.
*3: There is no module to convert PI21.
*4: RO61 has different number of outputs from RO663, and their shape and
arrangement also differ.
Model
Item
RO61 RO263
Terminal block 18 pin 20 pin
Output point 12 point(4point/common) 16 point(8 point/common)
Consumption current 50mA(internal 5V) 80mA(internal 5V)
External relay coil power required DC24V-140mA(all point ON) DC24V-90mA(all point ON)
*5: There is no module to convert MC11.
*6: MC612 and MC614 are no longer produced.
*7: There is no module to convert AS11.
Refer to the following manuals for the appearance and specifications of I/O modules:
･Integrated controller model 200 series
Sequence Controller S2 User’s Manual - Basic Hardware - (6F8C0836)
S2T User’s Manual - Basic Hardware - (6F8C0936)
S2E User’s Manual - Basic Hardware - (6F8C1094)
To Next Page
Loading...
