Chapter 3 Installation and Wiring
6F8C1497
72
Caution
Mount the power supply module, the controller module,
the station bus module, the I/O module , the interface
module and the terminal block signal conversion adapter
to the base unit
Otherwise, it may cause electric shock, injury, or failure.
Do not use them by themselves for other purposes.
Caution
Turn power off before installing and removing the
modules, the base unit, the terminal blocks or the
terminal block signal conversion adapter
Otherwise, it may cause electric shock, malfunction, or failure.
Caution
void foreign debris like wire scraps entering the
modules , units or the terminal block signal conversion
adapter
These may cause fire, failure, or malfunction.
Caution
When connecting a connector or cable and mounting a
module to the base unit, push it in until it clicks and
screw it firmly
Insufficient screwing can cause failure or malfunction due to
vibrations.
Caution
When handling the base unit, wear the gloves.
There is danger of injury by the end of the metal frame.
Instruction
Prohibited
Instruction
Instruction
Instruction
To Next Page
Loading...
