Tests and Diagnostics
3-84 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)
5. Select “Diagnostics” tab and click “Run”.
6. Check the “Log” to confirm the test result.
7. When the BT (Bluetooth) address of the responder device appears, the Bluetooth card
and antenna connection are OK.
If the BT address of the responder device does not appear, check the Bluetooth card
condition and antenna cable connection to the Bluetooth card by disassembling the
computer following the steps described in Chapter 4, Replacement Procedures.
BT address of test computer
BT address of responder
device
To Next Page
Loading...
