Tests and Diagnostics
3-98 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)
3.34.2 Starting T&D
3.34.2.1 Automatic Start
When WindowsPE starts up from the TOSHIBA Test & Diagnostic CD or the USB memory,
WinPE T&D starts automatically.
After the startup of the OS, unless CD volume name is WINTDCD or USB volume name is
WINTDUSB, WinPE T&D does not start automatically.
Note: If the system starts up from the TOSHIBA Test & Diagnostic CD, WinPE T&D in
the USB memory starts when the USB memory created in section 3-5-2 is
connected.
3.34.2.2 Manual Start
If the user starts WinPE T&D manually, move to the folder containing WinPETD.exe and
run WinPETD.exe.
Example of WinPE T&D to be executed from the command prompt screen
* The actual drive letter varies depending on the PC.
The storage location of WinPETD.exe in each device is as follows:
CD media drive: ¥WinPETD
USB memory drive: ¥WinPETD
To Next Page
Loading...
