Tests and Diagnostics
3-104 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)
▼ Testing time Updates the testing time and displays it in real time during the execution of
the test.
▼ Test setting and Result This will be explained in section 3-4-2.
3.34.4.2 Test setting and Result
▼ TEST Item Checks the check box of the item to be tested.
▼ Mode Sets the test mode for each test item.
▼ Status The following table explains status information of each test item (test
device).Status Description
Status Description
-- Ready for the test prior to the start of it.
*********** Gray out. It is indicated when the test environment is not ready.
Refer to the following items for details.
TESTING The test is running.
SKIP The test was skipped.
DONE The test finished
Note: The test item grayed out indicates that the test environment is not ready and its
explanation is displayed in the Status field.
The following table lists the statuses to be displayed on the screen and explains
their meanings.
To Next Page
Loading...
Need help?
General
