–26–
Installation Manual
EN
Inputting model names and serial numbers
▼
Standard workflow
Target product Model name and serial number display method
Light commercial indoor unit
Model name and serial number are displayed from data from the indoor unit
(manual input is not needed).
VRF indoor unit
Model name and serial number are displayed from data from the indoor unit
(manual input is not needed).
Enter information manually for the indoor unit of large capacity air discharge type
and duct types.
VRF outdoor unit
Model name and serial number are displayed from data from the outdoor unit
(manual input is not needed).
Light commercial outdoor unit Input of model names and serial numbers from the remote controller is required.
Service board
Input of model names and serial numbers from the remote controller is required
(but, not required if manually input to the remote controller before replacement).
Does this model transmit model names and serial numbers from indoor units / outdoor units.
Yes
Displays the model names and serial numbers of indoor units
and outdoor units as received.
(1) Manual input not required
(2) Select “Indoor unit” or “Outdoor unit” as “Model name
selection” (factory default setting)
No
(1) Input of model names and serial numbers from remote
controller is required.
(2) Select “remote controller” as “Model name selection”.
To Next Page
Loading...
