Toyota 4Runner - Installing Child Restraints Using a Seat Belt (Child Restraint Lock Function Belt); Rear Facing-Infant Seat;Convertible Seat

144
1-7. Safety information
4RUNNER_U
Installing child restraints using a seat belt (child restraint lock
function belt)
n Rear facing ⎯ Infant seat/convertible seat
Place the child restraint system
on the rear seat facing the rear
of the vehicle.
Run the seat belt through the
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Fully extend the shoulder belt
and allow it to retract to put it in
lock mode. In lock mode, the belt
cannot be extended.
CTH17AS038
STEP 1
CTH17AS039
STEP 2
CTH17AS040
STEP 3