EasyManua.ls Logo

Toyota 4Runner - Do Not Directly Splice Trailer Lights; Safety Chain; When Installing a Trailer Hitch

Toyota 4Runner
655 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
292
2-5. Driving information
4RUNNER_U
NOTICE
n When installing a trailer hitch
l Use only the position recommended by your Toyota dealer. Do not install
the trailer hitch on the bumper; this may cause body damage.
l Do not use axle-mounted hitches, as they can cause damage to the axle
housing, wheel bearings, wheels or tires.
n Safety chain
A safety chain must always be used between the towing vehicle and the
trailer. Leave sufficient slack in the chain for turns. The chain should cross
under the trailer tongue to prevent the tongue from dropping to the ground in
the case that it becomes damaged or separated. For the correct safety chain
installation procedure, ask your Toyota dealer.
n Do not directly splice trailer lights
Directly splicing trailer lights may damage your vehicle’s electrical system
and cause a malfunction.

Table of Contents

Other manuals for Toyota 4Runner

Related product manuals