Toyota 4Runner - After Replacing the Reservoir Cap; Checking the Fluid Level; When Adding Fluid; When Checking the Reservoir

508
4-3. Do-it-yourself maintenance
4RUNNER_U
n Checking the fluid level
Make sure to check the fluid type and prepare the necessary items.
Clean all dirt off the reservoir.
Remove the cap by turning it counterclockwise.
Wipe the dipstick clean.
Reinstall the cap and remove it again.
Check the fluid level.
Fluid type Automatic transmission fluid DEXRON
®
II or III
Items Rag or paper, clean funnel (only for adding fluid)
CAUTION
n When checking the reservoir
Take care as the reservoir may be hot.
NOTICE
n When adding fluid
Avoid overfilling, or the power steering may be damaged.
n After replacing the reservoir cap
Check the steering box case, vane pump and hose connections for leaks or
damage.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5