452
IN CASE OF AN EMERGENCY
5. Remov e t he c ap of t he sealant bot tle.
NOTICE
Do not remove the i nside cap.
Injection hose
Sealant
6. Connec t t he inj ecti on hose by sc rewing
onto the seal ant bottle. As it is
scr ewed in, t he alumi num seal on the
bottle will be torn.
CAUTION
Be car eful, as sealant may spout out
if you shake the bottl e wit h t he hose
installed.
Finish
RAV4_EE