TP-Link TL-SL5428 - Displaying Web Authentication Port Information

AAA Authorization and Accounting
3-91
3
CLI – This example enables web authentication for ethernet port 1/5 and displays a
summary of web authentication parameters.
Displaying Web Authentication Port Information
This switch can display web authentication information for all ports and connected
hosts.
Command Attributes
• Interface – Indicates the ethernet port to query.
• IP Address – Indicates the IP address of each connected host.
• Status – Indicates the authorization status of each connected host.
• Remaining Session Time (seconds) – Indicates the remaining time until the
current authorization session for the host expires.
Console(config)#interface ethernet 1/5 4-166
Console(config-if)#web-auth 4-133
Console(config-if)#end
Console#show web-auth summary 4-136
Global Web-Auth Parameters
System Auth Control : Enabled
Port Status Authenticated Host Count
---- ------ ------------------------
1/ 1 Disabled 0
1/ 2 Enabled 0
1/ 3 Disabled 0
1/ 4 Disabled 0
1/ 5 Enabled 0
1/ 6 Disabled 0
1/ 7 Disabled 0
1/ 8 Disabled 0
1/ 9 Disabled 0
1/10 Disabled 0
1/11 Disabled 0
1/12 Disabled 0
1/13 Disabled 0
1/14 Disabled 0
1/15 Disabled 0
1/16 Disabled 0
1/17 Disabled 0
1/18 Disabled 0
1/19 Disabled 0
1/20 Disabled 0
1/21 Disabled 0
1/22 Disabled 0
1/23 Disabled 0
1/24 Disabled 0
1/25 Disabled 0
1/26 Disabled 0
1/27 Disabled 0
1/28 Disabled 0
Console#